Surface Polished Carbide Milling Inserts CVD Coated

Description:

1.carbide milling inserts of type T
2.fresh raw material
3.beautiful surface tretment
4.corrosion resistance
5.high hardness

Surface Polished CarbideMilling Inserts CVD Coated

 

If you''reinterested in our products, pls contact us for moreinformation.

 

TYPE			Dimension(mm)
			L	I.C	S
TPCN	(ISO)	(inch)
	1103PDR	22PDR	11	6.35	3.18
	1103PDL	22PDL	11	6.35	3.18
	1103PDTR	22PDTR	11	6.35	3.18
	1103PDTL	22PDTL	11	6.35	3.18
	1603PDR	32PDR	16.5	9.525	4.76
	1603PDL	32PDL	16.5	9.525	4.76
	1603PDTR	32PDTR	16.5	9.525	4.76
	1603PDTL	32PDTL	16.5	9.525	4.76
	1604PDR	33PDR	16.5	9.525	4.76
	1604PDL	33PDL	16.5	9.525	4.76
	1604PDTR	33PDTR	16.5	9.525	4.76
	1604PDTL	33PDTL	16.5	9.525	4.76
	2204PDR	43PDR	22	12.7	4.76
	2204PDL	43PDL	22	12.7	4.76
	2204PDTR	43PDTR	22	12.7	4.76
	2204PDTL	43PDTL	22	12.7	4.76
TPKN	1103PDR	22PDR	11	6.35	3.18
	1103PDL	22PDL	11	6.35	3.18
	1103PDTR	22PDTR	11	6.35	3.18
	1103PDTL	22PDTL	11	6.35	3.18
	1603PDR	32PDR	16.5	9.525	4.76
	1603PDL	32PDL	16.5	9.525	4.76
	1603PDTR	32PDTR	16.5	9.525	4.76
	1603PDTL	32PDTL	16.5	9.525	4.76
	1604PDR	33PDR	16.5	9.525	4.76
	1604PDL	33PDL	16.5	9.525	4.76
	1604PDTR	33PDTR	16.5	9.525	4.76
	1604PDTL	33PDTL	16.5	9.525	4.76
	2204PDR	43PDR	22	12.7	4.76
	2204PDL	43PDL	22	12.7	4.76
	2204PDTR	43PDTR	22	12.7	4.76
	2204PDTL	43PDTL	22	12.7	4.76
TPAN	1103PDR	22PDR	11	6.35	3.18
	1103PDL	22PDL	11	6.35	3.18
	1603PDR	32PDR	16.5	9.525	4.76
	1603PDL	32PDL	16.5	9.525	4.76
	1604PDR	33PDR	16.5	9.525	4.76
	1604PDL	33PDL	16.5	9.525	4.76
	2204PDR	43PDR	22	12.7	4.76
	2204PDL	43PDL	22	12.7	4.76

 

 

Surface Polished Carbide Milling Inserts CVD Coated